-
I have the integration/add-on working, so many thanks.!!!!!
I'm looking for a address list/ coil list for the VVM500
If there is a address in the list that's not known i get an error and the add-o…
-
### The problem
Modbus stops working and HA cannot restart.
Removing modbus from configuration.yaml makes restart working.
### What version of Home Assistant Core has the issue?
2023.2.0…
-
### The problem
I have an issue where all my sensors and data for my Nibe heatpump goes Unavailable in Home Assistant.
I have a NibeGw EspHome module, and I have verified that the communication be…
-
So back in November, I was amoung the ones to beta test the SMO S40, using custom Home Assistant integration.
It was always working, but now after a full factory reset on my SMO S40, I lost all conne…
-
I'm having trouble getting the `dev-python/nibe` integration working.
When trying to add an integration, this gets written to the logs:
```
title, data = await validate_modbus_input(self.hass…
-
## Hardware and versions
* Inverter model & generation:
* Inverter firmware version:
* Battery firmware version:
* Home Assistant integration version:
## Describe the bug
A clear and…
-
### The problem
If you add a Nibe S1255 and make sure you really selected S1255 it's detected as S1155 in the area selection modal after adding.
Also the device overview the device is called "S115…
-
Hi Emil!
I wish there was a When-card with the "Addition power changed" function.
Thnx!
-
Hi Emil!
Thanks for a great app!
I have discovered a possible bug - phase 1 and 3 are switched.
I have Tibbers Pulse P1. In both the Tibber app and the Nibe Uplink app, the phases correlate with ea…
-
Hi,
first of all: many thanks for this great piece of software!
I have a F1245 with an (I think) old firmware revision - my pump do not have the service menu 5.3.11 (modbus settings). So I canno…