-
Hi I see references in the documentation for this project to a USB to RS485 interface for connecting to the pentair equipment. Have you had any success or can your recommend a more directly connected…
-
when I first used this example function months ago I saw the full result to console. Now when I run the example I see only the result of the first get equipment config only. What am I missing? I do…
-
I see this in the "verify final pool controller configuration
`Create 0 intellichem.`
And, there is no Intellichem device under EasyTouch 2.4 device.
I see this in the logs during discover…
-
When adding, setting, or deleting a schedule, I often get an `8300` response, but not the ack I expected.
```
2020-07-01T00:00:48.721Z sl:unit sending set schedule event command for scheduleId: 70…
-
Tab character causes error `/run.sh: line 193: ./set_temp 10.10.10.10 0 80.0: No such file or directory`. As a result, users are unable to change the Pool or Spa temperature.
**Code Reference**
ht…
-
[2020-09-22_07-06-53.zip](https://github.com/tagyoureit/nodejs-poolController/files/5265285/2020-09-22_07-06-53.zip)
**Describe the bug**
Haven't been able to detect controller since 6.0.0
**To R…
-
### Expected behavior and actual behavior
Expected to load all circuits in v6, in my example circuits 11 and 12. V6 only loads the first 4 circuits
### What is actually happening (screenshots a…
-
Intelliflo VS pump is off, but flow is reported as 55 GPM in state/all JSON
### Expected behavior and actual behavior
http://myserver:4200/state/all
expected: GPM is not reported or is reported a…
-
[component.txt](https://github.com/aws/amazon-freertos/files/3264596/component.txt)
**Describe the bug**
Am trying to enable the sntp with afr and made the following changes to the component.mk…
-
Hi, I'm using version 5.3.1. I have a Pentair VS and iChlor 40 with no controller. Using the virtual pump controller, I've noticed that the pump display continuously toggles from enabled to disabled a…