-
What's about with PPS support, i can't find any info documenting it. If it's not supported will it be supported and if it's supported how stable is it?
-
Here is https://pine64.com/product-category/pinecil/?v=fc0902513eb2 already available.
It says 25USD from 35USD but at the reality at the end it will cost around 43USD what is more then the TS100 can…
-
**Additional context**
i'm left-handed and (very slightly) annoyed every time i flash a new release
**Additional note**
just to make sure it's mentioned in an issue, the "no tip" icon in 2.16 alw…
evils updated
2 years ago
-
I'm using the latest Pinecil firmware for a Pinecil I got today. I'm powering it from my Lenovo laptop's USB-C adapter. When I start heating, the iron keeps showing 20-30 C while the tip is so hot it …
-
_This is a Complaint_
Hello, I have bought Pinecil and was trying to update from a factory firmware to the latest IronOS 2.15.
However, the GD32 DFU update tool recommended in _Flashing.md_ guide…
-
Today I wanted to solder something and the tip has become gloving red. I assume that the mosfet died.
Checking it I saw that it is Q7328. Where can I get a replacement for this mosfet? I have tride m…
-
PD power supply cuts out when the Pinecil negotiates voltages above the initial 5v.
I realize there are already a few issues open regarding this similar issue, but I want to provide some data I have …
-
i have other devices that use com ports and i have to unplug them every time i want to update. it would be nice to have the option to select what com port to use. otherwise it just fails unless you un…
pbanj updated
3 years ago
-
Hello,
I have just bought TS100 and i have updated firmware to v 2.15.40087E6 09-05-21.
Solder heats up nicely, but when it reaches desired temperature, it resets itself and temperature starts dro…
-
Release: v1.3
OS: Windows 10
App: Pinecil Firmware Updater
Used download link: https://github.com/pine64/pinecil-firmware-updater/releases/download/1.3/pinecil_firmware_updater_win64_1.3.zip
App…