-
Installed the driver on X and Y ( on SKR 14 Turbo) Z and E use TMC2209 and are much cooler than before specially Z (E is pancake stepper that comes with BB direct drive extruder, all on Ender 3 pro)
…
-
Hey there,
Since the steppermotors are hard to find and if you get them you have to buy them all over the place i thought i take a look and search a bit.
What i found is one shop that sells all wh…
-
I received an email asking about TMC2209 drivers in UART mode. I thought it best to move the conversation to a more public space so that the collective wisdom of the open source community can be harne…
-
Hi
how looks your wiring for UART for the tmc stepper ? are you using the Trigorillia board V1.0 or V1,1 ?
-
Hi all,
I would like to run Nema 23 4.2ah stepper motor with the octopus, but their are not movign at all...
Unfortunately I have not found any specific instruction on the wiring nor the coding pa…
-
On my [branch I have a change](https://github.com/johnboiles/grbl-mega-5x/compare/598eff46d0c8957fc9b53c9f7470bcfe28387ef2..cfe10d14f486a9d0a90300a8398f510988b127f6) to support configuring stepper dri…
-
I've got a [change in my branch](https://github.com/johnboiles/grbl-Mega-5X/commit/598eff46d0c8957fc9b53c9f7470bcfe28387ef2) to support Digipots for setting current on stepper drivers digitally. I add…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
There is different, strange motion sound with FTM enabled (without IS). See also https:…
-
Hi,
I have recently configured Teacup Firmware to work on Arduino Uno with 4 Pololu stepper drivers, but how to set Teacup to be used on Delta Printer?
Is there any implementation of Delta Kinematics …
-
Hello, i cannot configure my printer to home with this script.
Here's my config:
```
[autotune_tmc stepper_x]
motor: moons-ms14hs5p4150
tuning_goal: auto
sg4_thrs: 45
voltage: 24
extra_hyst…