-
I am going to evaluate the BLE extension board from STMicro in this project:
https://github.com/araobp/stm32-mcu/tree/master/NUCLEO-F401RE/
Then decide which BLE module is better, Microchip RN4020…
-
Debugger works fine except loading SVD file.
My config is:
``` json
{
"version": "0.2.0",
"configurations": [
{
"cwd": "${workspaceRoot}",
"executab…
pga23 updated
5 years ago
-
The documentation for the [CMISIS `osTimerCreate` function](https://www.keil.com/pack/doc/CMSIS/RTOS/html/group__CMSIS__RTOS__TimerMgmt.html#gaedd312bfdca04e0b8162b666e09a1ae6) is described thus:
…
-
I have trouble getting the battery indicators to work on a Surface Book 2 with a custom 5.7 kernel. Right now, I'm using the 5.7 branch of https://github.com/linux-surface/kernel but I have tried seve…
-
Hi,
When CONFIG_AIC7XXX_BUILD_FIRMWARE=y there is necessarily a compilation failure.
https://cateee.net/lkddb/web-lkddb/AIC7XXX_BUILD_FIRMWARE.html
Can we investigate, using the logs (stdout,…
-
I am trying to read the ACC+GYRO+MAG data stream using bluez. So I connect to the FCU:
pi@raspberrypi:~ $ sudo gatttool -b EF:2F:D0:24:0D:B2 -t random -I
[EF:2F:D0:24:0D:B2][LE]> connect
Attempting…
ghost updated
5 years ago
-
I think perhaps the recent commit to add initial stm32 support might be missing some files from the check-in:
```
$ make gen-device-stm32
./tools/gen-device-svd.py lib/cmsis-svd/data/STMicro/ src…
-
TPMs have been mentioned in the past in discussions as a TEE technology that could make use of the TEEP functionality. It appears that their functionality today is too limited to have them in scope fo…
-
I also tested `sys-2-crypt`, `make` worked, wrote `whole.img` to a USB stick. At bootup, it asked for a passphrase, however, the keyboard was dead.
This is on a PC with a UEFI-BIOS HP motherboard, …
-
I have a tube of ST-branded M27C256B UV-erasable EPROMs that all fail to have stuff written from 0x200 to 0x27F. The first bad byte written is 0x00. Subsequent bad bytes are 0xFF. Then from 0x280 o…