-
## The problem
Running Ikea on/off switches and remote controls with ZHA and Sonoff ZB Bridge on HA running on Proxmox. First of all, I want to mention the fact that the Ikea devices consume th…
ygreq updated
2 years ago
-
Has anyone tried to run Marlin on a Chitu F Series V3.9 Board? http://www.cbd-3d.com/en/prod/fdm.shtml
It came with a 3.5 TFT Color TouchScreen on my QIDI X-One. Running Marlin would be a huge improv…
-
### PROBLEM DESCRIPTION
The battery percentage of my Philips Hue dimmer switch is running down quite rapidly since I paired it with the (Tasmota) ZbBridge.
It decreases some percents per day whi…
-
Try to complie v2.63.4 for dragonlink. Only changed
//#define displaySupport
#define ESP32_Variant 3 // Dragonlink V3 slim with internal ESP32 - contributed by Noircogi
And try to verif…
-
Can the bellows library be made to support newer EZSP serial protocol such as EZSP v6, v7, and v8 when used with ZNet 6.x on Silicon Labs EFR32 (Mighty Gecko family) based Zigbee radio adapters?
Se…
Hedda updated
3 years ago
-
* `make` fails on `Linux 4.15.0-52-generic`, current latest kernel for Ubuntu 18.04 LTS 64-bit, with Vanilla GNOME (used as developer and main workstation + some server services)
* *The package `inte…
-
Hi,
I get an error when compiling Serial.begin(9600) for the ATtiny204.
When I switch chip to ATtiny404 it works fine. Results in 57% flash size. So I think Arduino Serial Library is to large to…
-
What is the correct pinout for the ESP-01 module? It appears the ESP module needs to be inverted to apply power correctly. The other pins do not match the locations either. Just trying not to let t…
-
First of all, thanks for this great library. Basically, I could get it running quite easily. I am using an AVR-NET-IO board with an ATmega664P (16MHz) and the EthernetENC library for driving the ENC28…
-
Hi
Is that repo still maintained ?? Numerous links are just 404 !!
`http://docs.heltec.cn/#/en/user_manual/how_to_install_esp32_Arduino?id=_1-execute-a-example-likes-factorytestino`
Detailed …