-
I have been using the Live image OS for multiple AP testing and it has been working great. However all of a sudden the tool started getting hung up on "Successfully initialized WPA supplicant", so I d…
-
I followed your guide to build the std-hello example for a esp32 on Windows 10 with `cargo build`. When invoking `cargo build --release`, the missing file is `sdkconfig.release`. Rust build seems to…
-
# Summary
I'm trying to use LittlevGL with an [m5stack](https://m5stack.com/collections/m5-core) development board (esp32-based with an ili9341 display). Both the display and SD card interface shar…
-
Maintainer: @nbd168
Environment: Ubiquiti UniFi AC LR (OpenWrt SNAPSHOT r16382-209c5918b5)
Description: For some time I successfully run a per-device WPA2-PSK setup using the following options:
…
-
I run several wifi lan segments. A couple are open with no password, and others are password protected. I can connect to the ESP8266 while it is in access point mode, and configure the wifi setup to p…
-
Hello,
I tried to compile the packages and everything works fine. I was able to (finally) load the Wifi module but everytime I try to connect to the local network, the Manager shows a message that …
-
- Your current Server version located at the bottom of any Hashtopolis webpage.
**Hashtopolis: 0.12.0+repository**
- Current Client version
**Agent: s3-python-0.6.0**
- Your current Hashcat versio…
-
### Hardware:
Board: ESP-WROOM-32 Dev Board (FCC ID: 2AC7Z-ESPWROOM32)
Core Installation version: 1.0.5-rc6
IDE name: Arduino IDE
Flash Frequency: 80Mhz
PSRAM enabled: …
-
# 环境：
- Module or chip used: ESP32-WROOM-32U
- Build System: CMake
- Operating System: Linux
- Using an IDE?: No
- Power Supply: USB
- IDF Version : ESP-IDF v4.2 --commit c40f2590bf759ff60…
-
### Prerequisites
Check all boxes if you have done the following:
- [x] Checked that your issue isn't already filed: https://github.com/tripflex/wifiwizard2/issues
- [x] Make sure you fill o…