-
Im trying to use the GPIO pins to trigger my PTT.
Im using the sudo rigctld -P GPIO -p 21 command to start the deamon. Via Telnet I tried to connect to the service and activate the PTT via the T 1 …
-
2021-08-12:17:16:33.067264: rigctld Hamlib 4.3~git Tue Aug 03 05:04:13 2021 +0000 SHA=f29ee3
021-08-12:17:16:33.192837: 0000 50 4f 53 54 20 2f 52 50 43 32 20 48 54 54 50 2f POST /RPC2 HTTP/
…
-
trying this anyway. The first issue I hit using WSJT-X v2.5.0 RC6 and the version of flrig in the Raspberry Pi OS repos, which is 1.3.42, is this error on initialization ("Settings->Radio->Test CAT"):…
-
In the Rig Settings anytime Test Cat is pressed with Split Operation=Rig the rig's split gets turned off. Clicking OK turns it on correctly.
-
When using the USB setting in WSJT-X for the FTDX9000 it overrides the selected bandwidth with 2400.
Should leave bandwidth alone
-
Hello, for some reason I got a lot of these:
Hamlib error: IO error
port_open: serial_open(/dev/ttyUSB0) status=-6, err=No such file or directory
iofunc.c(81):port_open return(-6)
rig.c(800):rig_o…
-
Hi!
With the very latest Hamlib and wsjt-x there comes a situation that wsjt-x needs rigctld's start parameter "--vfo" to work properly with split/rig mode.
How ever this starting parameter changes …
OH1KH updated
3 years ago
-
It would appear that records are repeatedly uploaded to Cloudlog.
eg
Uploaded QSO with 9A5CW
Then next time a contact is logged
Uploaded QSO with 9A5CW
Uploaded QSO with 9A5CW
Uploaded Q…
-
Feature request: Add IQ (in-phase / quadrature) token to modes list, unless DSB is considered the same as IQ in this case? Not 100% what is meant with DSB in the manpage....
Quite a few SDR-orient…
-
Following a discussion with @kng about streaming samples by UDP into gr-satellites, I have discovered that the performance of the UDP source block is quite poor in GNU Radio 3.8.2.0.
To test this, …