-
Implement IC-705
-
Hello
I have a RADDS with LCD RADDS original
I have two napes of 70cm
I activate in marlin 2.0 LCD RADDS
see the picture
the length of the tablecloth may cause this problem or I have not config…
-
This is because when built, the shed doesn't continue to the edge of the roof, but with 35cm space on each side.
-
Hello,
I tried to use the RadioLib for sending ax.25 frames using AFSK and Bell202 tones. As a radio module I used the SX1278. My objective is to use the SX1278 as an 2m APRS transmitter for a school…
-
The text in ADIFBANDSTRINGSARRAY is wrong for bands above 2M.
http://adif.org.uk/310/ADIF_310.htm#Band_Enumeration
Band Lower Freq (MHz) Upper Freq (MHz)
2190m .1357 .1378
630m .472 .479
560m…
-
Hi, thanks for the amazing work you provided here,
I almost succeeded in using Kinect IR marker solution (Easy Tracker version) here,
with some little buggy stuff I can't solve.
The P3P solver in K…
-
There is a setup on preferences/Bands/Frequencies where you can define the start and end of band and different mode limits within the band.
Then there is a subroutine called GetBandFromFreq that sh…
OH1KH updated
4 years ago
-
Hi,
I've created a rather rudimentary band plan for germany. Covers all amateur radio bands from 2.2km to 13cm as well as FM broadcast. Some license-free stuff like CB, PMR, etc. is also there.
…
-
**Describe the bug**
In PACKET window not showing UTC time of received APRS transmission
**To Reproduce**
Tune to 2m, click on PACKET, wait for received transmissions
**Expected behavior**
In…
-
```
2020-08-03 09:19:50,563 - owrx.__main__ - INFO - OpenWebRX version v0.20.0-dev starting up...
2020-08-03 09:19:50,661 - owrx.sdr - INFO - SDR sources loaded. Available SDRs: SDRPlay RSP2
2020-0…
d9394 updated
4 years ago