-
### Steps to reproduce
1 Connect HackRF to PC
2. Start gqrx (with the hackrf selected/set to default)
3. Click Start DSP processing.
4. (optional) Transmit to a local HAM repeater RX frequency (1…
-
A Tool to upgrade the device's firmware is missing for the Airspy HF+.
Please provide the sources how to flash this device.
A Linux binary is missing.
-
On linux here, I am receiving weatherfaxes via an airspyhf. Propagation changes during the day and I can control the receive frequency by sending a netcat command to sdrpp (currently I use crontab for…
-
Hello guys. I'm using RTL-SDR Blog V3 to receive the GPS L1 C/A signal and it works perfectly. However, at the beginning of the GNSS-SDR execution appears that the actual bandwidth is 0 Hz. How is sig…
-
When the sample rate (or filter bandwidth) is changed in running state, the DSP freezes with the following error log:
```
SaveConfig
New LNB LO: 0 Hz
saveSettings *** FIXME_ SQL on/off
New FFT ra…
-
Hi! I'm a newbee at SDR theme and I tried to run your dumper on Ubuntu 18.04, but i've failed. It were not any software requirements listed and I decided to fix all "on the run". First I got an error …
-
I have removed all of the SoapySDR modules and installed only what is listed in the notes on here **libsoapysdr-dev**
[2021-11-18 17:28:55.188] [info] SDR++ v1.0.4
[2021-11-18 17:28:55.188] [info…
-
### Steps to reproduce
1. Follow instructions to compile host tools and firmware from the master branch of the repository at commit 1408473b3857a3ad3f3d4adfca197ad495356e5f
2. Install compiled tool…
-
I get the following when trying to use the AppImage:
linux; GNU C++ version 7.3.0; Boost_106501; UHD_003.010.003.000-0-unknown
Gtk-Message: 08:27:53.987: Failed to load module "xapp-gtk3-module"
…
-
I'm pretty sure I did something wrong, but I can't make rtl_433 work with my PlutoSDR.
I installed PothosSDR version PothosSDR-2021.05.01-vc16-x64, enabling the experimental plutosdr support. I did…