-
Creating this so that frequency/overclocking/underclocking issues can all go to the same place, as opposed to being specific frequency requests per port.
The idea here is to make `microcontroller.c…
-
Thanks for the nice implementation of WS28xx on the PICO
When used alone on RP2040-Zero (Generic) NeopixelConnect works fine.
I am using it for the single WS2812 built onto the board at GPIO 16
Whe…
-
Hi
I tried to build the Pico port of MicroPython (v1.18, pulled today) together with ulab (latest version, pulled today). The targeted board is the Nano RP2040 Connect. The building process failed wi…
-
Hi @lexus2k & contributors,
Firstly thank you this qualified work. I would like to use this protocol with Pi Pico. But I have some issues about Serial1 When used on Pi Pico. My hardware setup is like…
-
## Issue template
- Hardware description: Arduino Nano RP2040
- RTOS:
- Installation type:
- Version or commit hash: galactic v2.0.3
#### Steps to reproduce the issue
To reproduce the issu…
-
- Arduino board: **Arduino Nano RP2040 Connect (with/without headers)**
- Arduino IDE version (found in Arduino -> About Arduino menu): **1.8.16**
- List the steps to reproduce the problem…
HSVDO updated
2 years ago
-
### Describe the bug
Using example code for MKR1000 the config portal will not come up.
### Steps to Reproduce
Load example MKR1000_WiFi101 sketch and run.
Connect to Wifi AP
Run curl with …
-
### Describe the bug
Using several boards (such as the RP2040 Connect or the MKRWiFi1010) on a WiFi connection (i.e. no Ethernet-shield but pure WiFi), I had to realize that this library's SocketIO…
-
Today I use NRFlite for a project with 4 nodes with Arduino Mega that have worked fine for long period now.
I have tried to use PR2040 instead. I have changed definition for SPI pins still no suce…
-
Can WIRE_BUFFER_SIZE in wire.h be increased from 128 to 256? In the equivalent wire.h for the mbed core for RP2040 the transmit buffer size is 256, so this change should make it compatible.
I ask b…