-
Despite your warnings on the menu, I still think it's a bad idea even providing an option in the UI that will brick users' devices. Also, the menu option ends up quite unsightly:
**UPDI Pin, READ D…
-
Somewhere there is a bug in the Servo Library of MegaCorex. The framerate of 4ms is much too short and kills every analog servo.
REFRESH_INTERVAL has no effect. If I use the original servo library t…
-
I'm having a similar issue to https://github.com/platformio/platform-atmelmegaavr/issues/6.
Uploading from Arduino IDE works fine but PlatformIO hangs forever.
I tried using the develop branch, to n…
-
Hi,
I'm using an arduino Uno for this, but after a long time (weeks if not months) it seems unresponsive and the only way to recover is to restart it with power recycle.
Is it possible that `dsc…
-
Your MiniCore, MightyCore and MegaCore are available as frameworks in PlatformIO's platform-atmelavr platform. Have you got any plans to integrate MegaCoreX into PlatformIO's platform-atmelmegaavr pla…
-
When I change `configCPU_CLOCK_HZ` from 10000000 to 20000000 in the Atmega4809 demo the led blinks slower.
I was expecting that clk_config.h and configTICK_RATE_HZ should keep the led blink frequency…
-
Hi! I tried to compile your code but it gave errors with al 3 platforms: Arduino Nano Every, Arduino Uno and Blue Pill.
How could I solve? (I tried with Platformio)
-
What kind of issue is this?
- [X] **PlatformIO ATmelAVR**.
If you’ve found a bug, please provide an information below.
### Configuration
**Operating system**:
Mac OS 10.14.6
**Plat…
-
I have been having persistent issues uploading to the Nano_Every from PIO with the atmelmegaavr platform (sample verbose at bottom).
It seems to be that the upload hangs as it forces a board reset …
-
The following code
```
void setup() {
Serial.begin(9600);
}
void loop() {
Serial.print('A');
}
```
when built for the ATtiny13a uses 0 bytes of SRAM and 88 bytes of Flash
```
R…