-
Enhancement:
Show the used mqtt-library in the information page.
-
Maybe I oversee something so I report it not as a bug:
Rule1":"ON","Once":"ON","StopOnError":"OFF","Free":438,"Rules":"on Switch2#state do publish domoticz/in {"idx":61,"nvalue":%value%} endon
w…
-
**Describe the bug**
I upgraded successful Sonoff SC, S20, S26, 4CH, 433Bridge, B1 to version 6.1.1
The only Device that failed is a Sonoff Basic.
The OTA failed, the device wasn't responding.
…
-
Hey folks,
I'm trying to dimm the pwm signal on D5 GPIO14 Sensor (37 PWM1) through a potentiometer whos connected to ADC input of the ESP-12e
Here's a picture of the device configuration in the …
-
Hi!
I use ESP-12S with firmware Sonoff-Tasmota 6.1.1. I select model type "18 Generic".
All configuration and firmware I make through the Arduino IDE. I manage to successfully flash firmware and use…
-
The problem is that during restart of the sonoff 4ch pro R2, the relays are turned on during the boot process. that is causing unwanted behavior with the garage door. Searched in the forums and find s…
-
Almost every night my T1 UK 3ch will lock up and turn all the lights on. It will remain unresponsive until power is removed and restored. This seems to be happening more frequently now. Previously it …
-
Make sure these boxes are checked [x] before submitting your issue - Thank you!
- [x] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)
- [x] Searched the problem i…
-
The latest releases of Mycodo has a new category, Functions, with PID Controllers placed as a type of Function.
I'd like to get some input from the community as to what type of functions you think …
-
**What:**
Add a field to categorize the analysis, so the user can run it N times at once if there are N parameters under study at each point, and you want to analyze them independently.
Like the…