-
BTT GTRV1
Octoprint 1.6.0
It seems that in my case the wait for the printer to reset is simply not long enough, from a verbose log inspections it seems like the code waits 10secs ?
From my own …
-
Hi
thank you for creating an Ender 6 setup....
Unfortunately I can not get it compiled with VS Code 1.54.1 and PlatformIO Core 5.1.0
and latest Marlin 2.0-bugfix nighly build (06 March 2021) and …
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I can't compile this latest Marlin (2.0.9.1) and actual bugfix branch on VSCode+PIO in Window…
-
Hi,
I am really struggling with the Marlin FW for this board. Although I could run the stock FW that Creality offers in compiled form on their website, I could not get my own FW build to work. The pr…
-
[klippy.log](https://github.com/KevinOConnor/klipper/files/3902119/klippy.log)
Attached is the log file
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I am trying to build the melzi_optiboot environment for the Sanguino ATMega1284p mainboard on…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Same behavior 2.0.7.2 and 2.0.9
Used different K-Type Thermocouples from different Ven…
qrstu updated
3 years ago
-
Hey Guys!
So, in the last few days he were some outage, and I was thinking about it.
I think it will be a greate improvment, if we could define in the firmware an outage pins. I the market have s…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Tried to turn on part cooling fan through display and gcode. no part cooling fan.
### Bug T…
-
You can enter in the firmware resurrection wasp mode?
So in case of power failure it can pause and resume printing the extruder to get up so as not to damage the piece and resume printing when you wan…