-
Hi Robert,
Great work with the Influxdb addition.
A suggested improvement is to add functionality to measure counts on 2 IO so that s0 pulses from kWh meters can be recorded.
Every pulse shou…
-
Hi
I use the service call climate.toggle to switch many VT-termostats on and off.
It functions fine on heating cables and ovens, but when performed on A/C unit it turns off the A/C unit fine, but…
-
My Heatpump app can take a feed that signals when DHW is running vs. CH, and provides kWh and COP numbers for each.
Several people have asked for that same information to be aggregated by HeatpumpM…
-
Is there a way that i can write all sensor data to a log. i am trying to look for some specifix sensor values. or if anyone by any chance know the id of the one where you increase the temperature setp…
-
without remote temperature sensor configuration, my unit is reporting a current temp of 0 degrees celcius for some reason.
Screenshot from the web server:
![image](https://github.com/user-attachme…
-
THIS IS NOT A THREAD TO ASK FOR HELP! USE GITTER CHAT FOR HELP
Hi guys, I would like to use this area to list unit types that are know to work with this library.
Exact number(as in tonnage) not ne…
-
Open Source Projects with an engaged community are more successful in the long run.
Therefore facilitating communication is one key ingredient for building a community.
Currently only a Slack ch…
-
I have to support elderly people over 80 year who went fully into solar power and are driving an EV, using ac split heatpumps and heatpump and have a big solar array + battery.
But I can not explai…
-
Through issue #1556 importing hybrid heat pumps through a csv file was enabled, thanks!
I have some questions on how to properly use this new feature and how to interpret it.
- The node to which…
-
I must be doing someting wrong but I can't figure what it is.
I use the module from SVEN. including the cable. And today I finally had the time to install it,
On my device connectors X and E are s…