-
the json-data at #Sensor-IP#/data.json
is not available until first messurement.
To prevent parsing-errors due to not existing data I would suggest to provide a json-data-array without values ins…
-
## Mycodo Issue Report:
- Specific Mycodo Version:
ver. 7.15 on Pi3B v 1.2
#### Problem Description
Hi All, I'm not sure what is causing this and would like to see if you have any advise?
Tr…
-
Hello,
maybe is a known issue but i don't see any data in this particular combination.
Thanks!
stefano
-
For now i2c bus implementation does not support error handling. Actually device can hang in case of en error or glitch on a bus.
For polling we can use timeouts for operations.
For irq - there is a s…
-
I use chinese clones. Like this: https://www.aliexpress.com/item/CJMCU-811-CCS811-Carbon-Monoxide-CO-VOCs-Air-Quality-Numerical-Gas-Sensors/32762314271.html
And this library is in trouble to read dat…
-
Hi.
I've recently test the library with the `HTU21D` & `SI7021` to read the sensor data in some interval callback like this:
```
#include
#include
#include
#include
#define D5 14
#define…
-
NRZ-2017-100-B7 seems to be unstable.
Testing over 2 hours: not more than 10 measurements/cycles are run,
then a reboot is done.
Sensor is not touched within the time and connected by 2A powers…
-
Hello,
I tried to connect ESP-12E I2C humidity and temperature sensor AM2321. I2C communication is not working. I tried it on Modemcu 0.9 (ESP-12) and on Modemcu 1.0 (ESP-12E). The same code works wit…
petrd updated
6 years ago
-
If an initial library is in work, and nothing is in the repo, almost (if not) all errors will be flagged.
There are a few checks that could still be valuable (Travis enabled, librarians), but the r…
-
hi
https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-raspberry-pi-kit-c-get-started
cd ./iot-hub-c-raspberrypi-client-app
sudo chmod u+x setup.sh
sudo ./setup.sh
after this step I go…