-
Hologram.io and other IoT cellular SIM providers (such as Soracom.io) have flexible data routers designed to directly receive data from the IoT field device and forward it to one or more endpoint dest…
-
Hi! I am trying to figure how to send commands to devices, that are connected via thingsboard gateway.
Devices are connected in the following way: device -> lorawan gateway -> loraserver -> thingsboa…
-
Hi, do you have a sample code for the sender and receiver you show on youtube with rfm95 in sleep mode and CAD mode?
Thanks a lot for this awesome example. 0.9mA receiving consumption is great!!
-
### The problem
The Things network can not start
failed trying to configure again
### What version of Home Assistant Core has the issue?
2024.8.0
### What was the last working version of Hom…
-
I observed a problem with DevStatusAns, my battery values where always wrong. I investigated and found out, that dev_status.rs:handle() just checks, that the first MACCommand in 'block' is valid, rega…
pnxs updated
5 months ago
-
- from
-
I think it could be useful to have the possibility to choose between sending the payload over lora or wifi.
In many countries lora has still some problems and this option could really benefit this pr…
-
**Hardware:**
Board: Heltec ESP32 WiFi Lora Board Core
Installation/update date: 25/nov/2017
IDE name: Arduino IDE
Flash Frequency: 80Mhz
Upload Speed: 921600
**Description:**
I want to …
-
### Summary
Do not autogenerate/prefill gateway ID in the console.
### Current Situation
If a gateway has an EUI, the console prefills the ID field as `eui-`. The intention of this was to make thin…
-
### The problem
in `/homeassistant/generated/usb.py` there are some entries for VID/PID combo's that identify USB dongles with a specific integration.
For Z-Wave JS this is included in the file:
…