-
Did a recent upgrade to one of my Raspberry Pi's to the latest version of NodeRed 1.2.2 and when you open a virgin browser window to port 1880 it goes through it's normal startup until it hangs on the…
-
Hello,
Thank you for posting this mpp solar service.
I have installed all of the modules, mqtt, influx, telegraph, Grafana and of course mppsolar sucesfully according to your instructions.
But …
-
Hi,
Hi,
I tried to use your software with an MPP Solar Hybrid V2 inverter.
But I don't get any data.
mpp-solar --device /dev/hidraw0 -D
> INFO:MPP-Solar:command QID
> INFO:MPP-Solar:Serial d…
-
Dear John!
Rebased my code and noticed that a test is failing:
======================================================================
ERROR: test_bulk_commands (tests.test_mppinverter.test_mppi…
-
The LV5048 protocol document indicates this parameter exists:
![image](https://user-images.githubusercontent.com/61173016/86513830-5765d380-bddb-11ea-891f-f91f99b1aa78.png)
![image](https://user-i…
-
Hi,
I have the 2424 MPP Solar Hybrid inverter and I was trying to run your script against it. It seems to hang on execution though with no output with either DEBUG or the RAW flag. Is the device n…
-
Hello, I cannot start the service, I use a raspi2 and Raspbian Buster, when I enter this I get the following error.
```
pi@PIP5048MG:~ $ systemctl --user status mpp-solar
● mpp-solar.service - MP…
-
hi, i have noticed that i have some difference in values returned from queries QPIGS and QPGS0
i don't have parallel controller.... and i don't know if that parameters are read wrong for that.
i w…
-
I needed the PV input power from the panels so I changed the QPIGS a little at the end to add some extra fields and fix the unknown byte issue, it seems to be working OK now for several weeks.
My q…
-
Dear John!
Python 3.7.3 pipenv environment on a vanilla[*] buster raspberryPi Zero W.
```
$git clone ...; cd ...
$pipenv install
$pipenv shell
$python setup.py develop
(mpp-solar-ZAEQa1-O) …