-
_From @Roxy-3DPrintBoard on March 30, 2016 19:59_
The Atmel ATSAM3x8e on the Due board is definitely viable. It has the benefit it can plug into the RAMPS or RADDS base board and at that point it i…
-
First off, thanks for the work you've put into this.
I think it'd be good to have a warning that the polarity for the pedals is reversed. For standard pedals, most of the time this isn't an issue alt…
-
I am very new to programming and electronics so this is very much a learning process. i have connected the MH-Z19B via UART - USB utilizing mycodo following direction in Kyle Gabriel's hydroponic auto…
-
### Bug Report
- Description: Bed is not leveled properly after BLTouch bilinear bed leveling
- Expected behaviour: I expect Marlin to take into account differences in height that are caused by my…
-
Provide the ability to use a different interface to serial (recommend a network interface such as a TCP socket) so that:
- Installations where the RS-485 interface is remote to the TWCManager machi…
-
Hello,
i`m getting seemingly random "driver errors" with my tmc 2130.
The LCD only shows "driver error" and i cant really get a clue from the seriel out also.
I sometimes happes while printing but …
ghost updated
3 years ago
-
The "even bigger laser" remains a doorstop and would be a useful addition to the DoES portfolio.
Discrete tasks in order would be :
a) location and orientation to be determined / agreed
b) bulk…
-
I could find a similar report with issue number #7645.
With the latest 4.2 master, build 2153, I still see this happening.
Most of the time it works correctly, but sometimes not.
After I connect …
0crap updated
3 years ago
-
I know that the docs already mention it (https://brachiograph.readthedocs.io/en/latest/explanation/hardware.html#beware-of-fakes), but I thought it can't be that bad, after all I just wanted to try it…
-
------------------------------------------------------------
### Bug Report
- Description: After Homing and ABL (Bilinear), print starts with the nozzle too high, although z-offset is set correctly.…