-
In de current software versions (5.8) when using a Sonoff pow it is not possible to configure a temp sensor on GPIO1 or GPIO3.
I believe this is still possible. The schematic doesn’t suggest that t…
-
My DHT22 since a couple of days (I upgraded to Raspian Strech), my DHT22 is not working any more. It alwayz said "Data not good, skip".
I was recompiling your software, did not work.
Then I mod…
-
Hi there, i am a beginner trying to adapt your code to my SSD1306 (128x64) SPI oled by using the Adafruitssd1306 library as U8g library doez NOT support the SPI version of SSD1306 display.
I keep get…
-
I have an am2302 sensor. I know wiring is correct because it works with adafruit python library:
sensor = Adafruit_DHT.AM2302 #DHT11/DHT22/AM2302
pin = 4
using dht-sensor module wi…
-
Hey, I really like your project and was able to get everything done so far. But now I'm stuck at adding a am2302 temp/hum sensor. I wired everything like explained in your program. But somehow it does…
-
Hello,
tryed to use you am2320.py
1. wget https://raw.githubusercontent.com/mcauser/micropython-am2320/master/am2320.py
2. ampy --port /dev/ttyUSB0 put am2320.py
3. picocom --port /dev/ttyUSB0
…
ds2k5 updated
6 years ago
-
Theyosh, unfortunately it shows me since yesterday no more values in temperature and humidity. Could you help me?
![unbenannt](https://user-images.githubusercontent.com/34924591/37662058-7c62cdb4-2…
-
Hello,
try to get Temprature from a DHT22
Board: NodeMcu V3, ESP8266
Board DHT22
GND --> right (4)
V3 --> left (1)
PIN4 --> Signal (2)
found this CODE but did not get a result:
…
ds2k5 updated
6 years ago
-
Hello there, i am using NodeMCU v3 Lolin with Arduino core 1.3.0. I want to send basic data do webserver over HTTPS. I have sketch with DHT22 for humidity, temperature and BMP280 for temperature and a…
-
Hi There,
I have a few raspberry pi's wired with DHT22 sensors. It would be very expensive for me to wire them all back up.
This is a working raspberry pi with raspbian:
- 4.1.20-v7+ #867 SMP…