-
Why am I seeing 802.11ax connection rates (>500mbps) on McDebian with a Samsung S20?
-
there are many beamforming algorithms in the readme, but there is no GSC algorithm. Will they be updated in the future?
thanks!
-
#### Describe the bug
*TF_DICS beamforming with mode 'cwt_morlet' only takes deafault or single value cwt_n_cycles, although it should also accept list of float with different cycle numbers for eac…
-
Currently the tracking beamformer is called things like the "pulsar beamformer", "pulsar beams", etc. While there are beams and processing steps dedicated to the puslar backend, the overall system is…
-
您好,请问在espnet的wsj0_mix_spatialized代码中,我运行的SDR结果大概在10-11dB,我运行了两次都是类似的结果,这是正常的吗?不知道系统默认的是不是双通道?因为双通道中您的结果高达20dB, 望解惑,谢谢您。
-
#### Describe the problem
Baseline-correction for source estimates is recommended/necessary for some processing steps. For example, for unsigned source estimates, differences in noise levels may resu…
-
Splice psrfits shouldn't need to be a separate step, but the output format (e.g. whether to splice contiguous frequencies together) should be supplied to the beamformer as a user option.
-
I pass to make_dics the output of csd_multitaper and I get this typerror
File "/data/home1/epinzuti/anaconda3/lib/python3.7/site-packages/mne/beamformer/_dics.py", line 174, in make_dics
…
-
Again not an issue but just wondering how much load an ESP32 can take but I2S is 2 channel so was wondering if digitally you could do something similar to this.
https://invensense.tdk.com/wp-conten…
-
**Is your feature request related to a problem? Please describe.**
Beamformer using array of 4 or more DMICs
**Describe the solution you'd like**
@singalsu will leave this open for you to define.