-
It would make sense to have a known good chdk firmware version for a given combination of camera/spreads/other components of a setup. This might take several problems out of the equation.
-
```
After applying a preset, when the camera is powered-down and back up, the AE
mode restored corresponds to the AE mode selected in the main dial, not the AE
mode set by the preset.
```
Original …
-
```
After applying a preset, when the camera is powered-down and back up, the AE
mode restored corresponds to the AE mode selected in the main dial, not the AE
mode set by the preset.
```
Original …
-
```
What steps will reproduce the problem?
what i got and what i did with it.
Camera-400d ver.1.1.1, fully charged battery, card reader and a 8G SanDisk
Ultra with window 7.
1.i've prepared the cam…
-
```
As in issue 85,106,303, 154, I think if will be added some functions for
lenses, it must be individual for each other. That is must be presets for each
lenses. Lens name and parameters must be l…
-
```
When some manual (i.e. M42) lenses are attached (via adapter) AF-confirmation
in body is disabled.
You have to buy special chip ("dandelion") to cheat the body.
It would be nice to have it enabl…
-
```
When some manual (i.e. M42) lenses are attached (via adapter) AF-confirmation
in body is disabled.
You have to buy special chip ("dandelion") to cheat the body.
It would be nice to have it enabl…
-
```
After applying a preset, when the camera is powered-down and back up, the AE
mode restored corresponds to the AE mode selected in the main dial, not the AE
mode set by the preset.
```
Original …
-
[My previous issue](https://github.com/DIYBookScanner/spreads/issues/188) was successfully resolved, so that I'm now able to get to the capturing stage of the process, but unfortunately I've come acro…
-
```
When some manual (i.e. M42) lenses are attached (via adapter) AF-confirmation
in body is disabled.
You have to buy special chip ("dandelion") to cheat the body.
It would be nice to have it enabl…