-
I installed a second batter today
Both batteries are cinnected by Daly BMS, i see them both in dbus-serial
I don´t have any smartshunt or other speciel things, just the 2 Batteries with 2 daly …
-
Hi,
I found today, that when the Multiplus disappears shortly (because settings update by VRM remote settings upload), the aggregate batteries driver just freezes its values. All other parts like S…
-
I have two DALY 8S 200A BMS. An older one and a brand new one. The old one works good with mpp-solar, the new one doesn't. It seems that some parameters have changed?
**Output from old one:**
```
…
-
Nach einer Erfolgreichen MQTT Verbindung werden die Daten korrekt an meinen IOBROKER MQTT Adapter übermittelt. Nach ca. 15 Minuten werden jedoch keine Daten mehr aktualisiert. Erst ein Reboot des WEMO…
-
I am using this script now some days and some safety concerns come to my mind
- What if NodeRed freezes?
- What if one of the BMSes is not reachable anymore at anytime?
The flow variables will st…
-
### The problem
Hello,
I tried to interface EspHome with daly BMS via RS485 and ran into 2 problems:
Problem 1:
the address of 0x80 is hard-coded into daly_bms.cpp, but my bms (8s, 250A) did no…
-
First: really great project and relatively easy to install. Worked for me in 10 min! Thanks....
As the BMS goes in to sleep mode, all values get lost to "unknown".
In the changelog i can see, since …
-
Is there any possibility to connect multiple BMS? Maybe using softserial or similar (as there is only one hardware serial port)?
To be more specific: I do have two BMS and one active balancer. I woul…
-
-
Hello, I have 2 questions that only partially concern your driver:
I have a battery pack 16x EVE280Ah. Since the cell capacity differed, I set the total capacity to the lowest value (271Ah). BMS is…