-
Board FW boots fine. I am powering on the printer w/ the DWIN_SET folder and its contents off of the root of the SD card. I have tried 3 different 8GB SD cards and have tried formatting in FAT32, N…
-
Hello,
the following code results in an error:
gabor = frame('dgt',{g,w},a,M,'freqinv');
fd = framediag(gabor, Ls);
The same code without 'freqinv' runs smoothly. I am using Matlab 2018a and …
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
**src/lcd/e3v2/proui/dwin_defines.h** line ~_65_
```
#define DEF_HOTENDPIDT TERN(PREHEAT_1_TEM…
-
hi i cant seem to compile 7zip for some reason here is the error code running you .cmd file
```C:\Users\James\Downloads\7z2106-src>BuildBin.vs2022.cmd
C:\Users\James\Downloads\7z2106-src>cd /d …
-
**Describe the bug**
With input shaping enabled for both X and Y, input shaping menu shows same value for X frequency and Y frequency.
When starting editing Y frequency, correct saved value appears.…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Just Enable
```
#if HAS_Z_AXIS
#if ALL(DWIN_LCD_PROUI, INDIVIDUAL_AXIS_HOMING_SUB…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
in **Configuration_adv.h**
under `#if HAS_DISPLAY`
having `#define SHOW_BOOTSCREEN` an…
-
I enabled MPC for the hotend and while the hotend PID option was gone, there is no MPC menu. I did verify that the MPC g-codes work through the terminal.
-
I have been compiling Marlin firmware for a long time with the arduino IDE right up until the last version 2.0.5, but since the new version 2.0.6 I am now getting a filename or extension is too long …
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
Firmware not compiled
```
G:\Cloud\Software\ender3s1\Ender3V2S1-Ender3V2S1-Released>platform…