-
i use this code, play wav file is ok,but record no voice? need help
-
我在学习adf的时候发现,4.3版本的lyart的板子喇叭声音信号实际上是来自phone_jack的DACOUT信号,而不是LOUT2,然后我找到了`es8388.c`文件,在里面找到了如下代码
```
# line 304
res |= es_write_reg(ES8388_ADDR, ES8388_DACPOWER, tmp); //0x3c Enable DAC and Enabl…
-
The code inside the ES8374 can never be compiled under normal circumstances because the component.mk file never includes it.
https://github.com/espressif/esp-adf/blob/316f6f77b1ee249004e09d1d6506a…
-
I have the ESP-EYE v2.1 dev board, is it possible to use the internal DAC (like in https://github.com/espressif/esp-adf/tree/master/examples/get-started/play_mp3_dac) in order to play audio? Or is the…
-
更新后dueros例程有的时候可以完整播放儿歌或者笑话,但是播放速率不正常,比正常音频慢,不知道你们测试的时候有没有。
-
Hello Team Espressif,
Recently we have brought a ESP-LyraTD-MSC which works excellent with IDF. I have a technical doubt around which I have tried and read everything but nothing worked out.
I th…
-
Device is esp32 lyraT v4.3 board.
IDF v3.2.2
make erase_flash was run prior to upload.
console output :
jponko@jponko-ideapad:~/esp/pipeline_bt_sink$ make flash monitor
Toolchain path: /home/…
-
I see there are some examples which have CMakeLists.txt but don't seem to compile (e.g. examples/player/pipeline_bt_sink), and examples which aren't set up for cmake at all (e.g. examples/get-started/…
-
I have made a simple two pipes demo here, I want to switch through the events of the button.Pipe 1 is connected to bt, pipe 2 is connected to AUX_IN, and the hardware is ESP32_LyraT v4.3.However, when…
-
I (16866,tid:3ffc6c34) lightduer_connagent.c( 212):add resource successfully!!
I (16880,tid:3ffc6c34) lightduer_connagent.c( 212):add resource successfully!!
W (16886,tid:3ffc6c34) lightduer_eng…