-
Per the release spec:
abstractcs.cmderr gets set if an abstract command fails- but, that's not the only circumstance it can get set in.
Experimentally on a gd32vf103 (gigadevice, 32-bit andes c…
-
PIO Core Call Error: "Library Storage: C:\\Users\\alexg\\Documents\\GitHub\\MH_Z19B_Relay\\.pio\\libdeps\\d1_mini\r\nUpdating Adafruit SSD1306 @ 2.2.0 [2.2.1]\r\nUninstalling A…
-
So I'm slightly out of my depth and was wondering if you could point me in…
-
I managed to boot seabios payload but tianocore does not boot with https://github.com/coreboot/coreboot
Where is the t440p specific configuration stored in this repository so I can compare?
ghost updated
3 years ago
-
硬改32mk2p版，1月16日最新版全新glong编译，无法软起动。软起直接亮红灯，断电后可以启动。
使用AmadeusGhost@7658518 版可以软重启，各项功能正常。
最新版没有32m选项，我看源码好像是自动识别，所以选择k2p进行编译。
-
Tried to install GigaDevice GD32V on macOS Catalina, got this error:
```
PIO Core Call Error: "PlatformManager: Installing gd32v\ngd32v @ 1.1.2 has been successfully installed!\nPackageManager: In…
-
Thank you for this solution, it works quite well.
There is a small issue, the `iManufacturer`, `iProduct` and `iSerial` strings are not shown:
```
boris@UbuntuMate:~$ lsusb -v -d 28e9:018a
Bus…
-
hi all,
here my current status of knowledge (please correct me if I'm wrong):
- STM8 SPL is currently under the ST proprietary [Mix Ultimate Liberty+OSS+3rd-party V1 ](https://www.st.com/content…
-
hi,armink.
我在使用demo测试，把sfud移植完成后验证easyflash报错。
报错信息如下：
SFUD](..\components\sfud\src\sfud.c:104) Start initialize Serial Flash Universal Driver(SFUD) V0.10.29.
[SFUD](..\components\sfud\src\sfud.…
-
time: target/linux/prereq#0.10#0.02#0.12
make[1]: Entering directory '/home/q/lede'
make[2]: Entering directory '/home/q/lede'
+ mkdir -p /home/q/lede/staging_dir/target-aarch64_cortex-a53_musl
+ …