-
I'm not sure what's causing this yet, but I've now had several automated reports of a crash when opening a file. The most recent one is below.
Program: embroideryReader, Version=2.2.3.0, Culture=ne…
-
Crash log
wxglade_tmp_menu.Append(wx.ID_ANY, "Transform", wxglade_tmp_menu_sub, "")
MeerK40t.py: Fatal IO error 11 (Resource temporarily unavailable) on X server :10.0.
Segmentation fault
/meerk…
-
Described in detail in #364. See the chart in https://github.com/inkstitch/inkstitch/pull/364#issuecomment-457930350 and the mention of decimal separators here: https://github.com/inkstitch/inkstitch…
-
I have a brother embroidery nv800e machine. From the machine I can save locally edited embroidery on USB key. Only output format is native .phc.
Inkstitch chokes when importing.
I attach a couple o…
-
@jameskolme If you actually need that sort of formatting it's not that hard to add. The old .txt was an export from Embroidermodder which I neglected to port. If you'd use G-code instead I'd have to k…
-
Inkstitch/Inkstitch#374 suggests there is a failure to trim for some Jef outputs. The comparison chart for the 400E and 500E says there are "Programmable Jump Thread Trimming". ( http://www.sewvacdire…
-
Lots of people are using the inexpensive K40 laser cutter and one of the initial requirements was to "upgrade" the controller board to RAMPS or Smoothie, etc to gain access to other sofware besides th…
-
Described in https://github.com/inkstitch/inkstitch/issues/374#issuecomment-452788483, it seems that TRIM commands aren't working in JEF files. The same design saved to DST on the same machine trims …
-
Hi, I am following recent development of bcnc, and I am very thrilled with new features and passion you guys put in this project!
Being inspired with this little mighty grbl , I have developed seri…
-
With regards to, inkstitch/inkstitch#342
@tobiastykvart Does the failure to recognize the pes hold true for wilcom converted files and brother converted files? Here's your file converted to those.
…