-
Is docker working in the latest build? I got the following error message from dockerd on R4S.
`Thu May 20 16:05:29 2021 daemon.err dockerd[7612]: main.(*DaemonCli).start(0x4000c8d170, 0x40007fc5a0…
-
大神你好,我的设备是nanopi r2s,采用的固件是R2S-Minimal-2020-07-27-ROM。
我的无线网卡是腾达U12,采用rtl8812au。
发现其可以采用client模式,无法启用ap模式
若是尚不支持当我没说,要是bug建议修复。
感谢
-
### rtl8153网卡挂载不上
**相应有驱动文件**
/lib/modules/5.4.79/r8152.ko
好像是驱动不上
固件是默认选项
那位高手指点下!
tl768 updated
3 years ago
-
### Verify Steps
- [x] Tracker 我已经在 [Issue Tracker](……/) 中找过我要提出的问题
- [X] Latest 我已经使用最新 Dev 版本测试过,问题依旧存在
- [X] Core 这是 OpenClash 存在的问题,并非我所使用的 Clash 或 Meta 等内核的特定问题
- [x] Meaningful 我提交的不是无意义的 …
-
```
root@OpenWrt:~# unsquashfs -p 1 /root/sq/jike2.squashfs
Parallel unsquashfs: Using 1 processor
8787 inodes (9142 blocks) to write
[====================================================- …
-
请问R2S-Minimal-2020-12-14如何在线升级至最新版本,可以使用“wget -qO- https://github.com/klever1988/nanopi-openwrt/raw/master/scripts/autoupdate.sh | ver=-with-docker sh”脚本直接升级到有docker的最新版吗?买了R2S就用了最后一个minimal版本稳定使用至今,十…
-
如题,编译r2s的时候遇到package/feeds/packages/xr_usb_serial_common failed to build.
附上最后几行日志,这个usb-serial的组件是有什么更新方案吗?
2021-05-24T21:05:33.2409119Z make[5]: *** [/workdir/openwrt/build_dir/target-aarch64_g…
-
中继节点出现域名,会出现错误,导致外网断
譬如
```
proxies:
- name: "ss1"
type: ss
server: 111.111.111.111
port: 20202
cipher: chacha20-ietf
password: password
- name: "ss2"
type: ss
server: ss…
-
R2S,固件使用https://github.com/DHDAXCW/NanoPi-R2S-2021
表现为,如果不开OpenClash,则使用非常正常,运行很久也不会出问题。但一旦开启了OpenClash 后,一段时间(大概几个小时),R2S ####[直接挂掉,DHCP无法获取地址,即使重启后也只能一闪而过进入后台,然后继续死机。是否是其他帖子所说连接数耗尽,没有注意。
之前使…
woyin updated
3 years ago
-
Attempting either `MACHINE=nanopi-neo3 source ./setup-environment.sh build` or `MACHINE=nanopi-r2s source ./setup-environment.sh build` results in a similar message:
```
The $MACHINE you have spec…