-
Hi all.
I'm using the ESP32-S3-WROOM-1 (N8R2 - 8MB Flash and 2 MB RAM), specifically this kit: [ESP32-S3-DEVKITC-1-N8R2](https://www.digikey.com/en/products/detail/espressif-systems/ESP32-S3-DEVKIT…
-
Hello!
My Mode-S Beast can receive both Mode-S and Mode-A/C at the same time. The received data is sent to Planeplotter using the AVR formet. What I don't understand is how Planeplotter knows which s…
-
The ESP32-S3 has a built-in LCD controller, including the ability to drive parallel (8080) and dot-clock driven displays. If CircuitPython can directly drive RGB displays, it may allow the use of low…
-
### Operating System
Ubuntu 20.04.5 LTS
### Esptool Version
v4.5.1
### Python Version
3.8.10
### Chip Description
ESP32-S3 (revision v0.1), 32MB Octal Flash, 80MHz, opi_dtr
### Device Descrip…
-
I have written a rudimentary Micropython driver for the ESP32 using displays that have either an 8bit or a 16bit parallel interface. It does work, cleaned up and refactored to get the best performance…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
Hello there is it possible to initialize the psram manually and use it with who examples ? i am trying to initialize psram after boot up but camera frame failed to allocate. I haveesp32s3 with 8 mb …
-
Hello
I'm using an ESP32-S3 device. I was trying to connect the device with rainmaker but after scanning the QR code and connecting with wifi the app is unable to confirm the node association and i…
-
Regardless of any settings it is impossible to capture JPEG with the OV5640 sensor. Tried faster/slower clk speed, compression, high/low resolutions, all leads to panic crashes and/or NO-SOI, with ext…
-
This code
```rust
#![no_std]
#![no_main]
use esp32_hal::{clock::ClockControl, pac::Peripherals, prelude::*, timer::TimerGroup, RtcCntl};
use esp_backtrace as _;
use esp_println::println;
use…