-
Just recently off of issue #57. I'm not sure this could be related, but since putting on that update I've had the aqualinkd service quit on me twice, right when a new command is sent to it. In each …
-
I'm running into a challenge where the SWG changes from 0% to 75% and back.
I have the system set to 75%. The system sets to 0% for about 10 seconds, then goes to 75% (which it should be) for a sh…
-
moved from: https://github.com/tagyoureit/nodejs-Pentair/issues/32
There are two places in the status packet (from Intellitouch) that relate to heater status. I don't think they are being decoded cor…
-
Is it possible to use this with the pump only and no intellitouch or intellicomm controller?
I have the pump only and I bought a USB RS485 adapter an plan to hook it to the directly pump.
(Penta…
-
New binding to interface with Pentair EasyTouch controllers, IntelliFlo pool pumps and Intellichlor chlorinators.
##
-
### Expected behavior and actual behavior
### What is actually happening (screenshots are helpful)
All control and updates to pool equipment are lost.
### Steps to reproduce the problem
Seems …
-
No issue with software, but for a newb, how do i get the software to connect to the pool pump? I have a pentair intelliflow variable speed pump, do i connect the rs485 to a raspberry pi or something e…
-
I was having some issues with timeouts so I set `log_level=DEBUG_SERIAL` in `/etc/aqualinkd.conf`. When I restarted the daemon, I got this output:
```
Jun 07 19:05:17 Upboard systemd[1]: Stopped A…
-
Do i need to do anything for this messgae?
![image](https://user-images.githubusercontent.com/5996164/48752772-c1019000-ec3f-11e8-97f7-954122cc6ede.png)
-
Having problems writing to serial bus. I have a Waveshare HAT RS485. I have a Pentair Easy Touch Controller with a heat pump and Intellibright light.
> nodejs-poolcontroller@5.1.0 start /Pubs/nod…