-
I thing something is wrong with my_user_config.h because with the latest release version I can't use WiFi Smart Config (I use it without problems on versions 5.x.x)
- [x] _Searched the problem in i…
-
Hi - Home assistant won’t let me use the sensor - it is saying error . I think it is because it’s name is sht30x-something .
My bme280 is fine
Can the name of the sht30x just be that?
-
**Have you look for this feature in other issues and in the wiki?**
Yes
**Is your feature request related to a problem? Please describe.**
No, it's a question on feature support
**Describe the…
-
'ascii' codec can't decode byte 0xe1 in position 24: ordinal not in range(128)
-
Sometimes when saving CCH it goes back to an old Lovelace file, and everything you saved prior to the CCH save is lost.
-
I also tested `sys-2-crypt`, `make` worked, wrote `whole.img` to a USB stick. At bootup, it asked for a passphrase, however, the keyboard was dead.
This is on a PC with a UEFI-BIOS HP motherboard, …
-
Hi!
I'm working on a project that has 3 PZEM004T sensors connected to the same UART. They have addresses and only respond when the message is directed to them.
My schematics is like this:
[Datasheet](https://cdn-shop.adafruit.com/product-files/2857/Sensirion…
-
Hello i'm new to the Project Homebridge. i just tried the half day to get this to work with an TMP101 Temperatur sensor from Texas instruments (http://www.ti.com/lit/ds/symlink/tmp100.pdf) but still n…
-
I see the readings above main menu :
SHT3X Temperature 21.8°C
SHT3X Humidity 51.9
after 5-7 minutes they are disapiring, nothing in logs, sometimes after restart they are back.