-
Hi,
Any chance we could get an updated card which includes 3 x MPPT's?
Then can we use the Aux for power coming in from a Micro Inverter?
Thanks
Spencer
-
Hi,
Absolutely wonderful job with this great power flow card, loving everthing about and promoted it in the Sunsynk FB forum.
Having Dual Inverters in parallel, I've created a multitude of templat…
-
I have one string of Solar panels and moving dots are going OUT of the middlebox section toward the Panels and towards Inverter.
Please see below:
-
Before 16h we were on stage 1. After 16h we are on stage 3. We have a load shedding slot from 14h-16h30.
Before 16h the card showed the slot correctly/completely.
After 16h the card shows the slot…
-
Looking at purchasing one of these, https://www.robotics.org.za/W16529?search=wave%20rs4 as mentioned here, https://github.com/kellerza/sunsynk/issues/60#issuecomment-1396526228. Would this be the be…
-
Hi there,
Great card, its beautiful! I attempted to configure it against my setup Deye 8 KW through Solar Assistant and the config was greatly different. Don't think I have everything configured co…
-
My Sunsynk addon x 2 have been working wonderfully since installed and set, thanks to Johann. An interesting Blueprint PV solar excess optimizer - auto control, has recently been released which requr…
-
Found this https://github.com/slipx06/Sunsynk-Home-Assistant-Power-Flow-Card/blob/main/animated_card_configuration_simple.txt
May help with defining the state
return hass.states["sensor.ov…
-
### Is there an existing issue for this?
- [x] I have searched the existing issues
### Current Behavior
There will be multiple enhancements suggestions. Therefore they'll be marked with & and…
FajnB updated
7 months ago
-
### Issue related to
Sunsynk / mbusd Home Assistant Add-On
### Describe the issue/bug
When following the guide to add the ESP lovelace card, the following error is presented:
![image](http…