-
# Bug Report
## What happened
From time to time bulbs cannot be controlled with Zigbee2MQTT through HA. Most of the time the bulb can then only be controlled through a remote directly attached with …
-
So this is a little bit off topic.
@dzungpv
I want to ask you how to exactly wire the CC1352. I am using zibgee2mqtt.
you said to wire Xds110 or later with 4 pin, TMS, TCK, Reset, GND, VCC(3.3V).…
-
**Describe the bug**
I can't figure out a way to bind a hue dimmer switch (rwl021) to a bulb or a group using ZHA.
Binding works fine when using zigbee2mqtt so the hardware is capable.
**To Repro…
Ulrar updated
3 years ago
-
Trying to move my zigbee2mqtt install form a raspberry pi into my VM.
I have spun a docker compose file with the following settings:
`zigbee2mqtt:
image: koenkk/zigbee2mqtt
container_name: zigbee…
-
@omerk FYI, just a piece of compatibility information, the Zig-a-zig-ah USB-stick should also be compatible with the Zigbee dongle adapter for TI CC-DEVPACK-DEBUG board designed by @turboproc
- htt…
Hedda updated
4 years ago
-
Hi,
I had changed the whole code in cc1352 . and now i am only getting accelerometer x_axis values but not getting y_axis,zaxis values . May I know other than read sensors is there any function to …
-
**Describe the bug** A clear and concise description of what the bug is.
Sending a ping request from the OT-BR, the message gets delivered, the replay is sent but the BR drop it.
**To Reproduce**…
-
CCS fails to build against the CC1352R LaunchPad when Energia succeeds.
It seems there is a discrepancy about the floating-point implementation.
> makefile:153: recipe for target 'Blink.out' fa…
-
With Code Composer Studio, building against the CC1352R fails during linking.
Error seems to be a discrepancy over the version of the tool-chain.
```
makefile:153: recipe for target 'Blink.out…
-
# Bug Report
## What happened
Using Z2M dev, cc1352-P2 firmware dev 20200306 on pi4.
Log is full of:
`error 2020-03-11 19:20:59: Failed to call 'DeviceReceive' 'onZigbeeEvent' (TypeError: Cannot…