-
Hi,
i really like your Enclosure plug in. Its grate.
Unfortunatly i can not get the Sensors to work. I Have a GY-BME280-3.3 High Precision Atmospheric Pressure Sensor Module Link: (https://www.a…
brwab updated
6 years ago
-
Hi, is it possible to add support for si7021 sensor in the next version?
tnk for your work
-
Hi,
is it possible to use other pins then 4 & 5 on the arduino.
You are mentioning something on the "SparkFunHTU21D.cpp" --> //Grab which port the user wants us to use
But I cannot figure out h…
-
https://github.com/opendata-stuttgart/sensors-software/blob/beta/airrohr-firmware/Readme.md
hier ist noch die Sparkfun lib aufgeführt.
Ich gehe davon aus, es wird die Adafruit HTU21DF Library Ve…
-
With all due respect, while I agree (FWIW) with the code in case '0', I question case 'f'.
To try to help, the 2 hex strings (data) I get back from 2 DSs are:
dd ff 4b 46 7f ff 03 10 25 : crc=25 Y…
-
Hello,
I'm trying to use your library with my Raspberry Pi and my HTU21D sensor. The sensor works, I have found a small test program written in c that outputs measurements. Still, I'd like to use som…
-
Hi,
What is your source for the temperature compensation of the humidity at line 418 in HTU21D.CPP . You claim it is valid for the SHT21 but I cannot any reference in the Sensirion datasheets for …
-
Hello,
I have a question. ESP8266 is using 3.3v on the GPIO pins, right?
I am assuming most I2C devices are 5v.
Are you assuming a logic level converter is in use or is there no issue betwee…
-
Habe den Sensor mit einem DHT nachgebaut. Das ganze lief etliche Wochen ohne Probleme. Wegen der 99.9 % Luftfeuchte-Problematik habe ich den DHT22 entfernt und einen BME280 angeschlossen.
In dieser K…
-
## Mycodo Issue Report:
- Specific Mycodo Version:
_5.4.19_
#### Problem Description
- what were you trying to do
_On the input page, deleting HTU21D sensor_
### Errors
- List a…