-
Hi there, I am trying to use Adafruit UART to enable UART4 to work with some modbus devices, but I am getting an error if I try to setup("UART4").
**code**
`import Adafruit_BBIO.UART as u`
`u.setu…
-
Am attempting to build/deploy with this command.
python3 make.py esp32 clean deploy BOARD=ESP32_GENERIC_S3 BOARD_VARIANT=SPIRAM DISPLAY=st7735 PORT=/dev/cu.usbmodem2101 --flash-size=4
It seems t…
-
I’m doing a project using a bare Attiny85 and an I2C Time of flight sensor (VL6180x).
The module has 10k pullups on the SDA and SCL lines, but I also added 10k resistors externally on the SDA and …
-
So i've been getting
> ERROR: open() for /sys/firmware/devicetree/base/ocp/P9_18_pinmux/pinctrl-names failed, No such file or directory
when trying to apply a config with config-pin -g .bbio. D…
-
Hi there,
for the last couple of days I am trying to migrate my application from PlattformIO to ESP-IDF. However, I cannot even get the "Textdemo" application to show text on an OLED display. The d…
-
Hello Everyone,
i assume that this isn't that common of an issue but i think it might be worth addressing.
**The issues**
Installing Manjaro to the Samsung PM1725a fails with an Error Popup as is…
-
Hello,
I am sorry to open an issue but i am not familiar with github and is impossible to leave a private message.
Anyway which xmega is suggested? I would like to make a few boards based on t…
-
New RISC-V based wifi SoC called ESP32-C3 was announced https://www.espressif.com/en/news/ESP32_C3
Unlike the Bouffalo Lab MCUs ( #559 ) this might actually be easier to support, since it is expected…
-
Full Output of Terminal on MacOS Sequoia 15.1 Dev Beta
and logs as well
[idf_py_stderr_output_50151.log](https://github.com/user-attachments/files/17219557/idf_py_stderr_output_50151.log)
[idf_py…
-
### systemd version the issue has been seen with
252
### Used distribution
Debian bookworm
### Linux kernel version used
6.1.61 (custom build)
### CPU architectures issue was seen on
arm
### C…