-
step:
1, create edge device in your IoT Hub
2. list device module and add new modules
3.input module name "test modules"
4. add module failed by badRequest as bellow
[Module] Creating 'test modu…
-
i am running aws_paho_mqtt.ino example.
I need to slow down the data uploading frequency to AWS IOT hub (once per 15 min).
when time delay between 2 data set is more than 20 seconds "rc"= -5
in aws…
-
TL;DR : ratgdo hardware and web UI work with 100% success, but HomeKit integration fails with 0% success.
OK, I have tried many times to figure this out with no success yet. It’s been rather frust…
-
Hi
I have been advised to post my question here by the support team.
I have about 3K devices that need to connect to the Azure IoT Hub, each device will need a unique connection string.
When …
-
At the March 20 dev meeting, I committed to getting these documented for reference.
The following are the list of scenarios I have been presented with for the case I'm generally calling "air gap". …
-
Since round about 5 days the control script is not able to set the SF output anymore.
It is independend if it goes up 0 --> 300 --> 800 or down 800 --> 0
If is done manuale via the Statuspage it…
-
## Usecase scenario
When an IoT Edge Deployment is being applied to a set of Devices there is currently no notification whenever this deployment has been successfully applied to the device or not. …
-
We use a number of Silex DS-510 USB devices servers to access a test bed of IOT devices running our firmware.
#1 The IOT devices are connected through 7-port TP-Link USB3.0 hubs to the DS-510 USB po…
-
### Start with the `why`:
The [OAK-SOM-IoT](https://shop.luxonis.com/collections/all/products/bw1099emb) (1099EMB) has a reference design for embedded use cases (actually it has 2, the [OAK-D-IoT-4…
-
The bullet for Azure IoT Hub has the wrong content, the prior bullet has been copied and pasted into it: "Azure IoT Edge Runtime: Azure IoT Edge Runtime enables cloud workloads to be managed and dep…