-
The current picture of the joystick should be rotated 90 clockwise so that the x-axis of the silkscreen is pointing to the right and the y-axis is pointing up.
-
- [x] assign product id (@pelikhan)
- [ ] take picture (@mmoskal )
- [ ] add to device catalogue (@jamesadevine)
-
See spec and image below. They disagree when the module is on the bottom edge (as given by the X-axis), the spec says that Y = 1, but acceleration is in Y is in the negative direction. All other case…
-
Title
-
From #273 :
> > Maybe we should move the CRC at the end of the frame so that smaller processors can compute crc in spare cycles during transmission.
> This is another breaking change to the prot…
-
- [ ] Issue reporting?
- [ ] Define diagnostics process
- [ ] More debugging tools.
- [ ] Trouble shooting ui on docs page
-
With the program below, I have the micro:bit in proxy mode, but the micro:bit simulator is not responding to physical button press (the character always remains U, it never transitions to D on press …
-
See https://makecode.microbit.org/_RVeCwjgyUAmA
The onConnected handler doesn't run on start. Note that it does run when you press the A button.
Then the second time you press the A button, the bu…
-
https://makecode.microbit.org/_9pwiffTVzeLw
```
modules.ledPixel1.onConnected(() => {
modules.ledPixel1.setAll(0xff0000)
modules.ledPixel1.setPixel(0, 0x00ffff)
modules.ledPixel1.se…
-
Download this program to hardware and try out on hardware:
https://makecode.microbit.org/_6t8MkcT00EM8
Note that sometimes a setPixel command is lost.