-
**Home Assistant release with the issue:**
0.83
**Last working Home Assistant release (if known):**
0.81
**Operating environment (Hass.io/Docker/Windows/etc.):**
Linux/CentOS with python 3.…
-
**Home Assistant release with the issue:**
0.98
**Last working Home Assistant release (if known):**
0.96 or earlier i think
**Operating environment (Hass.io/Docker/Windows/etc.):**
Docker…
-
Hello,
Pressure data reported from luftdaten sensors with a BME280 attached report pressure incorrectly and is off by a factor of 100.
Mine currently reads: 102776.13Pa
But should be: 1027.7613
T…
-
so ... this seems a bit odd. i have a script that runs just fine from the terminal but it gives this error when it is started up with `@reboot` in crontab.
```
Traceback (most recent call last):
…
-
We just found that `luftdatenpumpe readings --network=ldi` currently croaks half-way by yielding:
```
2019-06-26 12:48:46,140 [luftdatenpumpe.commands ] INFO : Acquiring readings from …
amotl updated
5 years ago
-
Getting a lot of the following errors. Anyone else encountered this before?
```
read failed: device reports readiness to read but returned no data (device disconnected or multiple access on port?)…
-
**Home Assistant release with the issue:**
0.92.2
**Last working Home Assistant release (if known):**
Was always this way (since maybe 0.85 when I started).
**Operating environment (Hass.io/…
-
Currently, the `/bySensor` endpoint returns all measurements +- 10 minutes for a certain timestamp. This doesn't respect the cases where the timestamp is in the first/last 10 minutes of a day yet.
…
-
**Home Assistant release with the issue:**
0.97
**Last working Home Assistant release (if known):**
**Operating environment (Hass.io/Docker/Windows/etc.):**
Hass.io 170
**Compon…
ghost updated
4 years ago
-
I have seen that the luftdaten sensor can support several displays like LCD 1602 (I2C: 0x3F and 0x27), OLED SH1106 and OLED SSD1306. But apparently it doesn't support the SPI/I2C version of the SSD1…