-
### What happened
I'm using LetsEncrypt to automate SSL certificates on my Pi, which runs Moonraker/Mainsail/Klipper. Since I had a "real" cert handy I plugged the details into Moonraker for `ssl_cer…
-
**Describe the bug:**\
When using a username that isn't "pi" mainsailos won't be accessible
**Expected behavior:**\
I expected it to work because there was no warning in the guide (https://docs.m…
-
PIP3 is required on raspbian, but is often not installed by default on distributions like MainSail OS which is very common in the klipper world.
On attempted install , though I have python3 install…
-
### What happened
I suspect there might be something wrong with the preprocessing of the file. I updated moonraker and Klipper to the latest versions and still have the issue. This is running on Ub…
-
**Describe the bug**
A clear and concise description of what the bug is.
**To Reproduce**
Steps to reproduce the behavior:
1. Go to '...'
2. Click on '....'
3. Scroll down to '....'
4. See error
Go t…
-
i configured everything as it should be.
this is my 4th machine running on klipper, and cant figure out what i did wrong. the other ones are running fine on the latest versions of klipper and moonrak…
-
On my Klipper install with Mainsail OS prints fail since 3 month. Before everything worked fine. If I print without filament it finishes but with filament it always fails at the same position. I have …
-
### What happened
I installed MainsailOS 0.7.0 with the Raspberry Pi installer, changing the username from `pi` to `mpfl`.
When trying to install [moonraker-obico](https://github.com/TheSpaghett…
-
I’ve been having random shutdowns for the last 2 weeks. I thought it was the idle time out but I’m still getting them after removing it from the config and restarting firmware. I tried looking at the …
-
### Linux Distribution
Mainsail os
### What happened
Someone walked me through the Kiauh install twice and as of the latest update, it is unstable. Superslicer was unable to start prints, and I was…