-
Paraphrasing a request from [the first APS beamline scientist attempting to integrate bluesky into her beamline](https://www1.aps.anl.gov/magnetic-materials/contact-us/fanny-rodolakis):
> Could the…
-
## Setup
`macOS-14.6` and `Ubuntu-20.04`, using `gfortran-14` and `gfortran-13`, respectively. The issue was tested using this `tblite` commit: https://github.com/tblite/tblite/commit/1665c5959a588…
-
* ability to set scan parameters before scans start (#71)
* `acu.generate_scan` accepts an `az_speed` and `az_accel` those need to be configurable (and the defaults should be 1 deg/s and 1 deg/s**2.)…
-
I am processing some rodent data which includes forward and reversed phase-encoding direction DWI scans. I am finding that the reversed scan does not display consistent orientation relative to the oth…
-
### Template Information:
Jenkins 2.50 through 2.423 (both inclusive), LTS 2.60.1 through 2.414.1 (both inclusive) does not exclude sensitive build variables (e.g., password parameter values) from …
-
if i pass command like this, i get error **ERR invalid cursor**
```
const result3 = await redisClient.sendCommand('scan','0 MATCH 17*');
```
if i send only cursor
```
const result3 = await redi…
-
I want to use esp32 as client to scan mybeacon device RSSI for proximity detection that broadcast signal with 30hz update rate, but esp32 scan rate only with 1hz update rate that resulting RSSI flu…
Sketh updated
5 years ago
-
As a user, I would like to be able to edit the currently executing script in the script server on the fly.
Example use case:
- User starts a scan
- Realizes the scan parameters are too coarse/fi…
-
[CAMPD_Emissions_API_Vulns.xlsx](https://github.com/user-attachments/files/17103248/CAMPD_Emissions_API_Vulns.xlsx)
![Image](https://github.com/user-attachments/assets/bf58537b-8029-4128-a217-48418402…
-
As far as I understand, to change the scan_interval from default 60 seconds to another value I have to create a sensor via configuration.yaml, because scan_interval is not shown in config_flow.
Co…