-
*jbrnd:*
The following problem occurs on Archer C7 running 18.06, as well as an x86-64 VM running 19.07.02
I was attempting to PXE boot a Raspberry Pi, which requires setting DHCP option 43 to "…
-
```
What steps will reproduce the problem?
1. use Disk Utility to make (compressed) Disk Image of entire working drive (to
third external drive)
2. replace internal drive with a new Sata 320GB Samsun…
-
```
What steps will reproduce the problem?
1. use Disk Utility to make (compressed) Disk Image of entire working drive (to
third external drive)
2. replace internal drive with a new Sata 320GB Samsun…
-
```
What steps will reproduce the problem?
1. use Disk Utility to make (compressed) Disk Image of entire working drive (to
third external drive)
2. replace internal drive with a new Sata 320GB Samsun…
-
Hi, is there any way to set thinclients that boot via pxe to shut down at a certain time (eg 6PM) regardless of what is happening on them?
Thanks
-
Hello.
So, I added symlinks to the ISO folder (folders with folders and then ISOS inside of them), and Iventoy GUI crashed, and the process started chewing memory until my PC crashed.
This is th…
-
```
What steps will reproduce the problem?
1. Setup a Serva host (e.g. on a Win 7 PC)
2. Set Serva as DHCP and TFTP server (no BINL) and boot file as grdlr
3. PXE client will boot OK
4. Now change Ser…
-
when pxe booting we can supply a [`default` file](https://wiki.syslinux.org/wiki/index.php?title=PXELINUX#Examples) to boot an unknown system (as long as it's on the provisioning network). This would …
-
See console logs:
```
[ 103.080254] systemd-resolved[2869]: System hostname changed to 'ampere-mtsnow-altramax-13.khw4.lab.eng.bos.redhat.com'.
[ 103.140581] systemd[1]: Starting NetworkManager-…
-
Thanks for the pve-iso-2-pxe script, which worked fine.
The iPXE bootscript would not run without two modifications:
1. The script should set a "webserver" variable instead of "ipserver" since t…