-
**Is this the right place for my bug report?**
Using a Debian installation from [https://raspi.debian.net/daily-images/] specifically [https://raspi.debian.net/daily/raspi_4_bullseye.img.xz] which us…
-
Hi,
I'm using your library with a BeagleBone Black and I encounter an issue.
When I communicate with the attiny85, at a certain moment on the i2c communication, the SCL pin it held LOW by the so…
-
I use the Raspberry PI to connect to a vintage CRT television from 1955 (Yes !)
At this time the French standard was 819 lines which was replaced by 625 lines later on.
I have modified my vintage …
f4hga updated
3 years ago
-
Dear ofxCvPiCam User:
I want to compile ofxCvPiCam (eg: example-ofxCvPiCamSimple) on my Raspberry 3B+, it outpouts error like this, any idea? Thanks!!
```bash
pi@raspberrypi:~/openFrameworks/ap…
-
Inputs are working with Linux kernel 5, but not with Linux kernel 6; there's only noise at maximum level in all 6 inputs.
Outputs are working.
I tried with recent versions of Raspian and Ubuntu.
…
-
I see that the current IO configuration and hardware interface ID information of NG are solidified inside the driver using macro definitions, is it possible to use the device tree to obtain this infor…
-
Loading kernel module with a clockspeed less than 7MHz causes it to fail to initialize. Below is the output from loading the module at 10MHz and 5MHz. The logic analyzer captures show the ESP32 respon…
-
Hello,
I'm using the I²S output of a Raspberry Pi 2b with Volumio 2.389 to provide audio data to a dsp (ADAU1701). The dsp must be configured as clock-master (so the raspberry is a clock slave) and…
-
A long long time ago (like 6 years!) I made a little clock from an Arduino, some seven-segment displays, and a GPS unit that displayed the current number of seconds since the Unix epoch. It was fun be…
-
Hello there!
I know, that the MKS Rumba32 board is not sold by your company, but maybe you can help me to solve my connection problem. I'm using Klipper as the firmware, where a Raspberry Pi is used…