-
### Describe the problem
Latest IDE (2.0.2) serial plotter is empty. No value gets plotted and
### To reproduce
Install a fresh nightly build and try to plot some values:
```cpp
Serial.print("…
-
Hello, we are currently trying out the setup you're describing in the documentation.
We tried out a 2x2 and a 6x6 grid of copper-tape as our prototypes. The Serial Plotter in the Arduino IDE only sh…
-
### Describe the request
Allow the "**Output**" and "**Serial Monitor**" views to be docked beside each other.
### Describe the current behavior
Only one view at a time can be displayed in th…
-
**Description about the bug**
The output value that is the value of the variable ```distance``` is not properly plotted in serial plotter.
**To Reproduce**
Steps to reproduce the behavior:
1. G…
-
I use serial Plotter and I move to second screen and application cracks
macOS 10.15.4
-
Hello,
I was able to successfully test the position sketch, but offset deviation is occurring with each course reversal.
I'm trying to read the motor shaft position from a motorized potentiomete…
-
Hi,
I've got a MAX9814 microphone and for whatever reason it only works when `channel_format` is set to `I2S_CHANNEL_FMT_ONLY_LEFT`.
The default of `I2S_CHANNEL_FMT_RIGHT_LEFT` causes errors in …
-
Hi Rob
Wondering if you are aware of the issue with ESP8266 and the HX711
I tried your library and everyone else version all result in the same error, works great on AVR
```
05:24:31.575 -> …
-
i just change i2sstream to analog and set channel to one . . . compile success but no audio out ..is this because slow wifi or what ?
#include "AudioTools.h"
const uint16_t sample_rate = 4410…
-
Well, this is awesome, and I'll stop using the Arduino IDE for serial monitoring/plotting.
Am wondering if it's possible to temporarily release the com port, so I don't have to exit and restart 'Be…