-
I posed this under another issue and now in this new issue.
My system is DSM is missing the cdc-acm. Anyone know where I may be able to get it? I can't get my Sonoff Zigbee 3 dongle to work after d…
-
Hi, there is a way to handle the state change of the SONOFF RF_BRIDGE that have multiple commands?
I was wondering if the **setDevicePowerState** method can work or also the **toggleDevice** but in …
-
## Feature description
Allowing Home assistant to trigger an alarm state on the paradaox alarm panel from any Device linked to home assistant, in this case a Sonoff Binary motion sensor or door s…
-
I get CH3 and CH4 entries for every T1 c2 device I connect, they don’t do anything
-
I'm installing some of them and it works quite well.
However I have this in my logs:
`2020-04-13 10:24:07 INFO (ZiGate-Decode data) [zigate] No template found for BASICZBR3`.
The template:
```…
-
### Latest firmware used?
Keil 8051 V9.53
Tasmota 8.0.1
### Information
Sonoff RF Bridge
### Sniffed data
None......... thats the issue, read on.
### Setup
1 Sonoff Bridge
4 Sonoff DW1 …
-
Got the Sonoff TH16 with AM2301 sensor working in homebridge, but it's registering as a thermostat and won't go below 32 degrees (don't know if it's Celsius or Fahrenheit. Is there a config setting t…
ghost updated
5 years ago
-
Hello!
How i can set Pulsetime on a 4CH for all 4 channels?
The command "pulsetime 10" sets only for Channel1.
LG
-
Hello,
a few days before i received my first sonoff devices.
I installed MQtt server on my raspberry pi 3 using this wiki https://wiki.fhem.de/wiki/Sonoff#MQTT_Server_einrichten
```
# Repo i…
-
Hi ,
I need to configure the Sonoff Dual in Toggle mode as per drive (for example) a rotation of a motor or a blind window.
all the possible state I want to have are :
Power 1 On ---> will …