-
Heads runs great on my x230 and very pleased with it. That being said, i wanted a desktop/home server for same. As this board is cheap enough and of reasonable spec, I am working to port heads to this…
-
### Describe the bug
Hi,
i tested this 4.3.1 on two H7 boards: MAMBAH7MK4 and TMOTORH7.
when the quad is powered up, changing the gyro from first to second (or vice versa). on reboot the motors…
-
Bladerf 2 micro is not able to start properly, fpga version used 0.11 (tried 0.11.1 didnt work as well) , firmware version 2.3.2, windows 10 usb driver used (WinUSB (v6.1.7600.16385). all leds light g…
-
Hi
after loading the cape and drivers, there is no spi device created in /dev.
This is with kernel 4.4.30-ti-r64. I've 'successfully' used insmod - all I see in dmesg is, after loading spislave c…
-
Hi, recently, read about your amazing project online. Built your project locally and it works.
There is a similar project like yours, using `dln2` instead of `usb-tiny-i2c`
https://github.com/notr…
-
Force touch exposes additional HID collections to the host OS (accelerometer and actuator). On USB-based trackpad, they are recognized by default, but no OS support is implemented. On SPI-based trackp…
-
The following kernel panic was observed while shutting down Linux. This kernel panic occurs intermittently. Running v15.5 of the WILC1000 firmware/kernel driver.
[ 190.921835] Unable to handle kern…
-
HW info:
- Holtek HT32F52352 (Cortex-M0+)
- MXIC 25L4006E 4Mbit SPI Flash
- Macroblock MBI5042GP LED Driver
FW disassembly annotation: WIP @ https://github.com/hansemro/pok3r_re_firmware/tree/cm…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
朋友传给我一个3.5的固件，配合汉化版上位机，读写128M nand需要6分钟，之前用这个HAL库移植到F205读写需要9分钟,把DMA做上去会不会快一点呢，另外做了usb_hs会不会快一点