-
### Describe the bug
TP-Link TL-WDR4900 v1 (N900) - wifi switch port stops forwarding packets on reception of certain multicast Ethernet packets (e.g. MACsec Key Agreement).
802.1X MACsec Key Agre…
-
# hardware
- LED responding to setup steps, and changing policy from frontend
- "reset" mode by connecting the two pins on the hardware.
- connect for 10 seconds, the LED should blink yellow…
-
Something is wrong with the Python or NodeRed scriptfor the Neopixels slider. In the earlier lesson with the LED Slider some Wifi code was missing.
With the Neopixel Sliders often the script don't co…
-
Hey all,
I'd like to create an AP on 6GHz using a compact USB or PCIe module with external antennas.
(It will be used for a robot in areas where 2.4 and 5GHz are saturated)
I read the **Alfa AWUS…
-
~~No other applications has this issue, it's just Discord.~~
Steam also has this issue
https://github.com/pop-os/cosmic-epoch/assets/66185010/605fac3e-4804-4484-814b-e9c8f95bacca
I had an iss…
-
The Wifi network electric is never showing up using 625 image on hardware that worked well with previous version.
-
### Board
ESP32-C3FH
### Device Description
Custom hardware
### Hardware Configuration
- using USB CDC on the ESP32C3 device ( have also tested with the device disabled)
- noise on 3.3v during T…
-
### The problem
Hi, i have one esp32 device that after every ota update losts api connection, if i update that specific device from esp home ui.
it gives error:
"WARNING Can't connect to ESPHome…
-
### Basic Infos
When the ConfigPortal is started on Demand, after it has already connected to WiFi, the param page doesn't show the custom HTML but only the save button, in some cases it also sho…
-
Hello,
I'm lost in the abundance of information on the community [https://community.home-assistant.io/t/hormann-garage-door-via-mqtt/279938](url)
My engine is SupraMatic P4 and I would like to con…