-
Feature request: I am using 24v to power my Duet 2 Wifi, (upgraded my Ender 3) and my printer is now SUPER quiet, thanks to the TMC2660s. Now the loudest part of the printer is the fans. The quietest …
-
The Default Tool Wiring for Duet2 (https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/assembly_instructions/wiring/duet…
ghost updated
4 years ago
-
Dear Marlin Team,
I would like to request support for the TMC2130 drivers, which is implemented by @teemuatlut on his Marlin branch.
To do so, we need to have a SPI Library for the LPC MCU.
T…
-
Hey Guys,
So i finally got around to putting the box in the generator and it looks like all is working smoothly. I just wanted to show off my build a little bit to show how I used some different co…
-
@mariovillalon from Mexico (where they aim to reproduce our FI5 prototype) forwarded us the following request:
>I found that there are some missing drawings of the custom components (in the Manufac…
-
It could help with assembly wiring and harness design to have them all come out at the edge.
@ebhillstrom opinions on direction of cabling / wiring harness coming out of the PCB?
In the assembl…
-
The issue may be unrelated to the Apex regulator board but I figured I had nothing to lose by checking here if anyone has a clue. I've posted recently about a Holybro Kakute F7 setup but have since sw…
udyux updated
4 years ago
-
Switch is labeled "target", headers are labeled "VCC", LED is labeled "REF", documentation and wiring harnesses i used "VTGT"
It should be consistent. Not sure what it should be. Arguments for each…
-
**Overview**
The LVR monitor Raspberry Pi was created for real-time monitoring of the Gen3 LVR outputs, housekeeping voltage rails, and temperatures. This task is to create a "mark 2" version with im…
-
I've been flying for the last few months without any issue using the following equipment:
- ImpulseRC Apex with FETtec F7 KISS FC & Flyduino 4in1 25A ESC (running 4s)
- Apex regulator & OSD boards…
udyux updated
4 years ago