-
Is there a bug, or am I doing something wrong?
Here's a snippet of my code (I say snippet, as I'm only pasting the relevant stepper motor bits):
Also, note my if statement in this example is psued…
-
it is not necessary to set the TMC drivers in the configuration?
-
### Did you test the latest `bugfix-2.1.x` code?
No, but I will test it now!
### Bug Description
I have been having random resets on various printers while printing large files for long amo…
-
Hi,
Just wondering when A4988 Stepper Motor Driver be available for use with .net core 3.0. as it is almost impossible using "Uln2003 motor component" to drive A4988 Stepper Motor.
Note: Not with…
-
The "CoolStep" example is perfectly working in my code. I have made zero changes to the said example code except keeping CoolStep enabled throughout the execution of my code, but there's one kinda bi…
-
La présence de 4 vias empêche la déposition de soldermask entre le pads du A4988, ce qui fait que la soudure fuit dans les via et peut entrainer une erreur de soudure . Mettre 3 vias devrait régler le…
-
Hi @ProjectsWithRed
I got my setup is running, I leave everything same as your original sketch it seems matches with my calibration.
A new problem for me why these motors are moving very slow like "…
-
### Bug Description
#define INVERT_Z_DIR false => Z&Z2=right rotation
#define INVERT_Z_DIR true => Z=left rotation Z2=right rotation
### Version of Marlin Firmware
bugfix-2.1.x
### …
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Firmware not compiled with USB flash drive support for BTT SKR PRO v1.2
![image](https://use…
-
### See latest post at bottom for better summary and narrowed down bug in stepper.h and stepper.cpp.
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### …