-
I cloned the latest repo in the hopes of deploying it to my own board with some new features for PIR sensors on the same NodeMCU. I setup the network info and mqtt info in the code, uncommented the No…
-
## Bug report, debug log and your config file (optional but could be very helpful)
#### Steps to reproduce
from the web configuration -> remote control -> color adjustment -> brigh…
-
I successfully tested my setup using an Arduino Uno. It was connected to `hyperion` on a Raspberry Pi 4 (via USB), but was limited to ~400 LEDs due to memory constraints. I therefore swapped in a Mega…
-
Hi all.
Is it possible to integrate WLED with Ambient Light Aplication over serial?
Website: http://ambilight.tender-complex.ru/en/
Android App: https://play.google.com/store/apps/details?id=com.…
-
Nowadays 4 chips ( Red, Green, Blue, White) LEDs are becoming so popular in lighting applications that RGBW leds support is a must. RGB leds are unable to light up your room with warm, nice looking li…
-
- [x] I confirm that this is an issue rather than a question.
## Bug report
First of all I'm aware I'm using CoreElec and you most likely will tell me to go to the CE forums an…
-
- [x] I confirm that this is an issue rather than a question.
## Bug report
Hi,
i'm using the ng project since a while (alpha6) on my RPI3B+ and also after this update i still see a high CPU load…
-
## Bug report
First of all I'm aware I'm using CoreElec and you most likely will tell me to go to the CE forums and ask there, but I tried and unfortunatelly folks there weren't able to help me. Here…
-
Hello,
LEDFX Can't find any Devices and if i add them Manual they dont show up.
on Raspi 4
## Settings:
```json
{
"audioInputs": {
"isLoading": false,
"options": [
…
-
Hi!
I tried to change the baud rate to 460800 for having more FPS, but then the Nano couldn't control the LEDs. I have 103 LEDs and with the baud rate set to 153600, it's working.
I use the Pris…