-
It seems to be impossible to drive dotstar LEDs using spidev1.1 on raspberry pi. Maybe because [dma seems not to be supported by raspberry pi on spi1](https://www.raspberrypi.org/forums/viewtopic.php?…
-
This isn't really an issue but I could not find a way to message you! Sorry!
I was wondering if there is a way to have my LED strip constantly illuminated or for example have a constant rainbow cyc…
-
Struggling to get this working ?
Have a setup with the 8266 working perfectly.
Using the same code and wiring setup, just the first 2 LED's light up white and the 3rd LED flickers.
Using 72 A…
-
I am finding that when I flash CP 3.0 to my itsybitsy_m0 _express, my Ubuntu linux system is not recognizing the FS.
It works fine if I flash CP 2.x
dmesg output when FS fails with 3.0
```
…
-
The red/green looks weird against a cyan or orange or purple blade. Would be nice to choose "red-ish" or "green-ish" in matching colors.
-
Modify the _dotstar.so_ to use spi0.1 with chip select according to #3.
-
It seems that the current master (7f7cbe8efa7d61683872fa93629491bce7ef5135) breaks Trinket M0 — after flashing the device doesn't appear as USB at all, and the LED is purple. It is working with 3.0.0-…
-
_From @bockha on September 26, 2017 15:45_
Modify the _dotstar.so_ to use spi0.1 with chip select according to #3.
_Copied from original issue: IUNO-TDM/MotorShield#11_
-
Thanks for adding the wiring diagram to readme.md, I will clean up your drawing and send you a nice one. Could you please also show how to connect the speaker and DotStar to the prop shield? I will c…
-
Here is the list of libraries that still need an examples folder:
Pending PRs needing Review
Completed PRs
- [Adafruit_CircuitPython_Thermistor](https://github.com/adafruit/Adafruit_Circuit…